FTS Calib Tab

calibration tab

Calibrating to the Color of your Table Felt:

This program looks at the color of the table to see if there are board cards present, which is used to determine what "street" the action is at. When you first use this program, OR when you change the color of the table felt, you must configure this software to the new colors of the table.

  1. Go to the "Calib" tab on the FT Shortcuts program.
  2. Open one (and only one) Full Tilt Table.
  3. When there are no board cards present, click on the "Calibrate Felt Colors" button on the Calib tab.
  4. You should hear a beep (unless disabled on your computer), and see the color of the felt appear in the 3 colored boxes (Flop, Turn, and River).
  5. Repeat the process if you did not capture the table colors without any board cards present.

Calibrating Seat Colors:

Use Image Recog. for detecting number of seats at table

Check this checkbox if you plan to play (or when you play) tournaments or Sit 'n Goes that have Heads Up OR 6 man tables. This feature will slow the operation of the software slightly, but must be checked to correctly determine the number of seats for these tournaments and SnGs.

If you plan to play any Tournaments or Sit 'n Goes that are Heads Up or 6 man tables, then you also need to calibrate this software to the color of your empty seats. For Heads Up and 6 man tournament tables, the software is not able to detect the number of seats at the table, unless it does so using color matching (looking for the color of empty seats). To do this, you need to calibrate the software to capture these colors on all 8 table types (Classic tables with 2,6,8, and 9 seats AND Racetrack tables with 2,6,8, and 9 seats).

Note: You do not need to perform this calibration if you only play ring games or 9 man tournaments and SnGs. If you play heads up or 6 man tournaments and SnGs, then you need to perform this calibration.

Perform this calibration any time you

  1. Change the color or your table felt on Racetrack tables
  2. Change the color of your floor on Racetrack tables
  3. Change the color of the seats on Classic tables

To perform this calibration:

  1. Open an empty Classic 2 man table
  2. Be sure no players are seated at this table
  3. Press the "Calibrate Classic 2 man" button
  4. You should hear a beep, and the color around seat 1 will be put in the small color square.
  5. Repeat steps 1-4 for the Classic 6,8, and 9 seat tables
  6. Repeat steps 1-4 for the Racetrack 2,6,8 and 9 seat tables

 

Return to Software Tab Index